Amsberry Painting provides cabinet painting in Redmond, WA. We refinish kitchen and bathroom cabinets using a full prep process and top-shelf brands like Sherwin-Williams, Benjamin Moore, and PPG. We’re family-owned, with over 50 years of work across the Greater Seattle Area. Cabinet painting gives Redmond, WA homeowners a fresh kitchen for a fraction of a remodel’s cost.
Cabinet Painting In Redmond, WA
A Sprayed, Factory-Smooth Finish Without The Cost Of A Full Kitchen Remodel
A Careful Scrape, Sand, Prime, Caulk Process And Top-Shelf Paint On Every Door And Frame
Tired kitchen cabinets can date a whole room. But a full remodel means new boxes, weeks of disruption, and a big bill. Cabinet painting in Redmond, WA is a cost-effective way to get a fresh look without gutting your kitchen.
At Amsberry Painting, we treat cabinets like the detailed work they are. Cabinet substrates need real prep work to hold paint through daily use, grease, and steam. We scrape, sand, prime, and caulk before any color goes on. Then we apply top-quality products for a smooth, durable finish.
We’re a family-owned company led by CEO Cooper Amsberry, with over 50 years serving the local area. We never skip steps and never cut corners on a single door.
How Amsberry Painting Refinishes Cabinets In Redmond, WA
Our cabinet painting in King County, WA follows a clear, step-by-step process. Each stage protects the finish so it lasts through years of kitchen use.
Prep And Protect Your Space
First, we label and remove doors, drawers, and hardware. Then we mask off counters, floors, walls, and appliances. Kitchen work creates dust and overspray, so full protection matters. This keeps your home clean and lets us work without damaging the surfaces around your cabinets.
You get a tidy job site and cabinets ready for proper prep, not a rushed setup.
Clean, Scrape, And Sand The Surfaces
Next, we degrease and sand every cabinet substrate. Kitchen cabinets collect grease and oils that stop paint from sticking. Sanding gives the primer something to grip. We scrape and smooth any rough or worn spots too. This step is why the finish holds up instead of peeling or chipping months later.
Skipping it is the most common reason painted cabinets fail, and we don’t want that to happen in your home.
Prime, Caulk, And Fill
Third, we prime the cabinets and caulk gaps or seams as needed.
Primer blocks stains and creates a bonded base for the color coats. Caulking and filling clean up joints and old dents. This work happens before we apply any paint, so the final coats sit on a solid, sealed surface. The result is even color and a smoother look across doors and frames.
Spray The Top-Coat Finish
Finally, we apply top-quality paint or stain from Sherwin-Williams, Benjamin Moore, or PPG. We match the product to your cabinet type and how the kitchen gets used. Spraying gives that factory-smooth finish rollers can’t match.
Reassembly And Final Cleanup
We reinstall doors, drawers, and hardware once everything cures. You get durable, scuff-resistant cabinets that look freshly built, thanks to our process and the same procedures we follow on every job.
When we leave your home, it\u2019s like we were never there, thanks to the thorough clean-up and final walkthrough.
Cabinet Painting Choices For Your Redmond, WA Kitchen
A few decisions shape your final cabinet painting results. Here’s how to think through them.
Choosing Your Cabinet Color
Color sets the tone for the whole kitchen. We offer free color advice to help you narrow choices that fit your cabinets and incoming light. Want a full paid color plan? We refer that service out to a trusted partner at a discounted rate. Sherwin-Williams and Benjamin Moore both offer strong cabinet-ready colors for you to choose from.
Paint Or Refinish
Painting covers cabinets in a fresh, solid color with our full prep process. Cabinet refinishing keeps more of the wood look while updating the finish. Cabinet painting and refinishing both cost far less than replacing solid boxes. We help you decide based on your cabinet material and condition, and the look you want for your kitchen.
Why Choose Amsberry Painting For Cabinet Painting?
We built our reputation on process and follow-through, not taking shortcuts. Here’s what that means for your cabinets.
- We Never Skip Steps: Cabinets fail when prep work gets rushed. We follow our full clean, protect, prepare, and paint process on every job. That means scraping, sanding, priming, and caulking your cabinets before any color, so the finish bonds and holds. We won\u2019t cut corners, because that\u2019s not who we are.
- Details As A Core Value: Paying attention to details is one of our six core values, and our cabinets are better for it. We label hardware, mask edges, and spray for a smooth finish. This close attention is why the doors and frames look consistent when we’re done.
- A Family-Owned Reputation: Amsberry Painting is family-owned and led by CEO Cooper Amsberry, with over 50 years of experience across the Greater Seattle Area. We have 300+ online reviews. As locals, we have a real stake in the work we leave behind, and we work hard to maintain our reputation.
- The Golden Rule In Practice: We treat your home the way we’d want ours treated. Our team arrives on time, in uniform, and leaves your kitchen as clean as we found it. Professionalism is a standard here, not a hope.
- Top-Shelf Brands Matched To Use: We use only Sherwin-Williams, Benjamin Moore, and PPG. Kitchens see grease, steam, and daily wear, so we pick durable, scuff-resistant products built for that. We tested multiple brands before opting to use these.
Our services are tailored to give homeowners what they need from cabinet painting services when they need it most. We have a streamlined, tested process that we use each time we complete a job.
What Redmond, WA Homeowners Say About Amsberry Painting
Amsberry Painting has earned 300+ online reviews across the Greater Seattle Area. Homeowners point to our prep work, clean finish, and professional crews. Read what people say about working with our team.
Everything you could ask for in a paint contractor.
I highly recommend this company for your painting project.
Will definitely work with Amsberry Painting again.
Cabinet Painting FAQs For Redmond, WA
These are common questions we\u2019ve gotten about cabinet painting in Redmond, WA. Ask us anything else through the form below, and we\u2019ll be happy to answer.
Do you help me pick a cabinet color?
A: Yes, we offer free color advice to help you choose. We’ll guide you toward colors that suit your cabinets and kitchen light. For a full paid color plan, we refer you to a trusted partner at a discounted rate, since we don’t run that service in-house.
Do you paint cabinets outside Redmond, WA?
A: Yes, we serve Redmond, WA and cities in the Greater Seattle Area. That includes nearby areas like Bellevue, Kirkland, and Sammamish. You can check our full coverage location on our service areas page or ask us about your specific location
How much does cabinet painting cost in Redmond, WA?
A: Cost depends on a few clear factors, so we quote each kitchen after seeing it in person. The number of doors and drawers matters most, along with cabinet condition and how much prep and repair they need. Color changes and finish type also factor in.
We provide an accurate estimate before any work starts, with no surprises during the work.
Is cabinet painting cheaper than a full remodel?
A: Yes, cabinet painting costs far less than replacing cabinets. A remodel means new boxes, demolition, and weeks of disruption. If your cabinet structure is solid, painting refreshes the look for a fraction of that. It’s why many King County, WA homeowners choose cabinet painting first.
What if my cabinets have damage or worn spots?
A: We handle common issues during prep. We scrape, sand, fill, and caulk dents, gaps, and worn areas before priming. If a cabinet has damage beyond a simple paint fix, we’ll tell you upfront during the estimate. We won’t paint over problems and call it done.
Will the paint hold up in a busy kitchen?
A: Yes, when the prep is done right, cabinet paint holds up well. We degrease, sand, and prime every substrate so the finish bonds completely. Then we use durable, scuff-resistant products from Sherwin-Williams, Benjamin Moore, or PPG. Our prep is the reason painted and stained cabinets last instead of chipping.
Start Your Painting Project Today
Do you need a residential or commercial painter? Turn to the professionals at Amsberry Painting. We offer a range of interior and exterior painting services in King County and Snohomish County that will transform your space and stand the test of time. Your home or business will look brand new when we’re finished.
